Posted in January 2012

Accessing US-only blocked content in Canada (video)

UPDATE(April 24, 2018): This content is very outdated, and I’ve been requested to link to some more relevant content provided here: I’ve reviewed the content and believe it to be accurate and valuable, but can’t speak to the specific service they recommend, or if there’s an affiliate relationship involved with that recommendation.

This is a video of a dry-run of my screencast for DemoCamp 17 on accessing US-only content that is blocked from Canada.

Tagged , , , , , , , ,

Accessing US Content From Canada with a Boxee Box

If you want the answer without having to read the rest: Unblock-Us.  If you want to hear more of the story of my experience, read on!

Following the strong recommendation of my friend Ryan Jones, I finally broke down and bought a Boxee Box to replace my 7 year old Dell laptop as my primary HTPC (Home Theatre PC).  I’ve been fairly happy with the device and it’s functionality, and perhaps I will do a more comprehensive review at a later time, but for now I want to talk about the setup I ended up using to be able to access US only content (e.g. Pandora, Netflix US Selection, etc.) using my Boxee Box.

If you’re curious about the actual mechanism that is used to block access to US content for those of us located elsewhere, I discussed it in more detail in an earlier post about Pandora.  Here, I’ll simply summarize by saying that all computers have an address (just like houses), and that the US content providers check that address when you request content from them, and deny you if your address is not located in the US.  There are several ways you can try and get around this limitation, and unfortunately for most of them if you want to get decent performance you’ll need to open up your wallet.

For my Boxee Box I initially tried to use one of my standby solutions for this problem; a paid VPN service.  In this case I tried using a service called Overplay, chosen because of it’s fairly low cost ($10/month), and the fact that they had an article specifically about using their VPN with the Boxee Box.  I won’t fully replicate their instructions here, but will instead redirect anyone interested in configuring a VPN on the Boxee Box directly to their article here.  Their steps take you through configuring the Boxee Box to use their VPN service and turning it on.  This part of the process went fairly smoothly, but then I started to encounter some issues.

I first attempted to use Netflix with the VPN turned on.  This didn’t work at all, simply leaving me at an unchanging black screen until I exited back to the Boxee Box interface.  Worse, after exiting the app it had disappeared and was nowhere to be found, and I could only recover it by restarting the Boxee Box.   (I should note that I have a support ticket in with Overplay for this issue, and have not yet heard back)  After several attempts with similar results, I attempted changing the VPN server.  Overplay has three servers located in the US; one in each of the west, central, and east.  I was initially using the East server, so I changed to the Central server.  Fortunately the Central server yielded improved results, allowing me to log into Netflix and get my test US-only content (the Tron movie) streaming, as well as to get Pandora configured.  Unfortunately I was still experiencing frustrating issues.  Occasionally my Boxee Box would decide that it no longer had an internet connection, and I would have to go back into the settings and re-run the network wizard so it would realize it was still connected.  I also experienced bandwidth issues with several sources of HD content, exhibited by halts to the streaming every 20-30 seconds as content buffered.  Finally I was frustrated by the fact that the VPN was not turned back on when I restarted the devise.  Every time I restarted the Boxee Box I needed to go back into the settings and reconnect to the VPN.

My vision for using a Boxee Box was that I could achieve a seamless experience for accessing my local content, as well as the US-only content that I sorely miss.  The VPN alternative was falling short of this expectation, so I looked for other alternatives and came across Unblock-US.  This is a somewhat mysterious service which appears to have gone through several name changes, and seems somewhat questionable even from the less than professional appearance of their website.

I also am currently at a loss to explain exactly how their service works.  There is a Quora article trying to answer this question, but no answer has yet been forthcoming.  From what I could find from various discussions it appears to manipulate the DNS requests for the services it enables by returning alternative IP’s, but what exactly it does with your requests after that point I am not sure.  It does not seem likely that they are in fact routing all your streaming content through their servers as they offer a lower price point than any other competitors that are providing products based on that form of solution.  In any case, the failure of the VPN based solution to live up to my expectations led me to give Unblock-US’s 7-day trial a go.

So far I have only had success with their system.  It requires you to go into your network settings and manually change your DNS server to point to their provided servers.  This may seem scary if you don’t know what a DNS is, but they have explicit instructions to walk you through this change in the Boxee Box settings.  I turned off my VPN, followed their instructions, and went to go test how it worked.

Much to my surprise, I have had no issues with Unblock-US’s solution.  Both Netflix and Pandora were still available and working, and the bandwidth issues I was experiencing through VPN were no longer present.  One of the inherent disadvantages of Unblock-US is that they have to support every service you wish to use, but their list of supported services is quite extensive.  I will continue to make use of their service, and if my experience changes I will updated this post, but so far I am surprised to say I am very happy with how well their solution has worked out, and I intend to cancel my VPN subscription and move my subscription dollars over to them.

Tagged , , , , , , , , , , ,

Meta – Migrating mice and pen from posterous to wordpress

If you visited my blog before, you might notice that there’s now a completely new look and feel. In this particular case this went well beyond a simple reskin, and actually involved moving my blog completely over from being hosted on, to being hosted on my own hosting using WordPress.

I made this move for one larger reason, and several smaller ones. The main reason is simply that my other blog, is hosted using WordPress, and I’ve fallen in love with the quality of the tools that come with WordPress, and the functionality available through the large number of community plugins.  The smaller reasons may be outdated as Posterous has been busy making improvements, but these are what initially drove me to use WordPress:

  • Difficulty doing code highlighting
  • Frustrating web-based editing interface
  • Frustrating interface for working with assets (images, etc.)

My intention is not to start a flame war between WordPress and posterous, but I’ve been very happy with WordPress and would rather only be using one platform across my various blogs, so I wanted to move this blog over to WordPress.  This is a quick record (written in WordPress) of the process of migration.

First I created a temporary WordPress site to give me a location to migrate my posterous site to.  I use dreamhost for the hosting of this blog, and they have a “1-click” install for WordPress which made this very quick and easy to do.  Following the basic WordPress setup (create admin account, give the blog a name, etc.), I went to Tools > Import hoping to see posterous.  Unfortunately posterous is not one of the default import options in WordPress.

Fortunately a quick search of the available WordPress plugins yielded a posterous importer which I was able to install.

After installing the posterous importer plugin, posterous showed up as an option in WordPress under Tools > Import.

Clicking on the now available “Posterous” option yielded a basic form with a few fields that needed to be filled in with my posterous info.

After clicking “submit” the plug-in ran off and was able to grab all my posts and comments from my posterous blog and pull them over to my new WordPress blog.  Once I had all my posts pulled over I wanted to install Disqus, which is the comment system I use on Spring Launched, and which I like because of it’s social media integrations.  This was a fairly straightforward process to install using the plugin system in WordPress, and to setup by going to “settings” in the list of plugins under “Disqus Comment System”, and then selecting “install” at the top right of the settings page.

To import my existing comments I then had to go to the “import/export” section of the Disqus settings, and tell it to import the existing WordPress comments into Disqus.

The last step I had to take to get my content all moved over was to add syntax highlighting to my WordPress blog as several of my posts from posterous had code embedded in them, and the porting process lost much of the formatting.  After a little bit of research I came across the WordPress plugin “WP-Syntax”, which gave me the functionality I needed.  To actually convert the code that had been imported from posterous to the format supported by WP-Syntax took a bit of montonous copy/pasting, but it achieved the desired result.  It is worth noting that if I had a large amount of code in my posterous blog this would have proved quite a cumbersome task!

In order that my old backlinks would correctly work, I wanted to maintain the URL format that posterous uses for it’s posts.


WordPress default:

This setting can be changed in WordPress under Settings > Permalinks:

At this point I had my temporary wordpress instance on dreamhost working like I wanted to, so now I needed to move it over to where I wanted it to be hosted.  First I needed to change the domain in the wordpress general settings.

Then I simply setup as a fully hosted domain in dreamhost, and then connected through ssh and used the linux command “cp” to copy the files over:

macbook: Ben$ ssh -l [my_login]
[argonauts]$ cd
[argonauts]$ cp -r ../* .

Using the terminal may be intimidating for some who are not familiar with the command line. If you belong to this camp you can accomplish the same thing through ftp by copying the files from the temporary folder to the folder for the permanent location.

At this point the migration was pretty much complete, and I was ready to unleash my new WordPress based blog on the world!  The one step I didn’t talk about here is moving the DNS from pointing to posterous, to get it to point to the new host.  This will be dependent on your setup, but if you have any questions about this step leave them in the comments and I’ll do my best to help!

Happy Blogging!

Tagged , , , , , ,